Cisco Cisco IOS Software Release 12.2(2)XF
12
Release Notes for the Cisco uBR10012 Universal Broadband Router for Cisco IOS Release 12.2 XF1
OL-1565-02
New and Changed Information
Note
are the filenames for the MIBs as they exist on Cisco’s FTP site
(ftp://ftp.cisco.com/pub/mibs/ or
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml). Most MIBs are available in
both SNMPv1 and SNMPv2 versions; the SNMPv1 versions have V1SMI as part of their filenames.
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml). Most MIBs are available in
both SNMPv1 and SNMPv2 versions; the SNMPv1 versions have V1SMI as part of their filenames.
Table 5
Cable-Specific MIBs Supported on Cisco uBR10012 Routers
MIB Filename
Description
Introduced
in Release
in Release
SNMPv2-SMI.my
SNMPv2-SMI-V1SMI.my
This module specifies the Structure of Management
Information (SMI) for SNMPv2, as defined in
RFC1902.
Information (SMI) for SNMPv2, as defined in
RFC1902.
12.2(1)XF1
SNMPv2-TC.my
SNMPv2-TC-V1SMI.my
This module defines the textual conventions as
specified in RFC1903.
specified in RFC1903.
12.2(1)XF1
SNMPv2-MIB.my
SNMPv2-MIB-V1SMI.my
The management protocol, SNMPv2, provides for the
exchange of messages that convey management
information between the agents and the management
stations, as defined in RFC1907.
exchange of messages that convey management
information between the agents and the management
stations, as defined in RFC1907.
12.2(1)XF1
CISCO-SMI.my
CISCO-SMI-V1SMI.my
This module specifies the SMI for Cisco’s enterprise
MIBs.
MIBs.
12.2(1)XF1
CISCO-TC.my
CISCO-TC-V1SMI.my
This module defines the textual conventions used in
Cisco’s enterprise MIBs.
Cisco’s enterprise MIBs.
12.2(1)XF1
IF-MIB.my
IF-MIB-V1SMI.my
This module describes generic objects for the Layer 3
network interface sublayers. This MIB is an updated
version of MIB-II's if table and incorporates the
extensions defined in RFC2233.
network interface sublayers. This MIB is an updated
version of MIB-II's if table and incorporates the
extensions defined in RFC2233.
12.2(1)XF1
DOCS-IF-MIB.my
DOCS-IF-MIB-V1SMI.my
This module describes the DOCSIS-compliant Radio
Frequency (RF) interfaces in CMs and the CMTS. This
MIB has been released as an RFC2670.
Frequency (RF) interfaces in CMs and the CMTS. This
MIB has been released as an RFC2670.
12.2(1)XF1
DOCS-BPI-MIB.my
DOCS-BPI-MIB-V1SMI.my
This module describes the attributes for the DOCSIS
1.0-specified Baseline Privacy Interface (BPI) on cable
modems and the CMTS.
1.0-specified Baseline Privacy Interface (BPI) on cable
modems and the CMTS.
12.2(1)XF1
DOCS-BPI-PLUS-MIB.my
1
DOCS-BPI-PLUS-MIB-V1SMI.my
This module describes the attributes for the
DOCSIS 1.1-specified Baseline Privacy Interface Plus
(BPI+) on CMs and the CMTS. This is revision 05 of
the MIB.
DOCSIS 1.1-specified Baseline Privacy Interface Plus
(BPI+) on CMs and the CMTS. This is revision 05 of
the MIB.
Note
In DOCSIS 1.1 operation, this MIB replaces
the DOCSIS 1.0 version, DOCS-BPI-MIB.
the DOCSIS 1.0 version, DOCS-BPI-MIB.
12.2(1)XF1
CISCO-DOCS-EXT-MIB.my
CISCO-DOCS-EXT-MIB-V1SMI.my
This module extends the DOCSIS standard RFI MIB
(DOCS-IF-MIB) with Cisco-specific extensions, such
as QoS attributes and connection status and other
information regarding the cable modems and CPE
devices supported by the CMTS.
(DOCS-IF-MIB) with Cisco-specific extensions, such
as QoS attributes and connection status and other
information regarding the cable modems and CPE
devices supported by the CMTS.
12.2(1)XF1