Manualsbrain.com
  1. Manuels
  2. Marques
  3. Cisco
  4. Cisco IOS Software Release 12.2(2)XG

Cisco Cisco IOS Software Release 12.2(2)XG

Télécharger
Page de 48
      NM-AIC-64, Contact Closure Network Module
AIC CLI Syntax
35
Cisco IOS Release 12.2(2)XG
alarm # dirn trmt
Sets the TL1 direction (DIRN) of the specified alarm to transmit (TRMT). This command is available to 
level 1 and 2 users.
alarm # dirn rcv
Sets the TL1 direction (DIRN) of the specified alarm to receive (RCV). This command is available to 
level 1 and 2 users.
alarm # dirn na
Sets the TL1 direction (DIRN) of the specified alarm to NA. This command is available to level 1 and 2 
users.
alarm # locn nend
Sets the TL1 location (LOCN) of the specified alarm to near-end (NEND). This command is available 
to level 1 and 2 users.
alarm # locn fend
Sets the TL1 location (LOCN) of the specified alarm to far-end (FEND). This command is available to 
level 1 and 2 users.
alarm # locn line
Sets the TL1 location (LOCN) of the specified alarm to line (LINE). This command is available to level 
1 and 2 users.
<no> control # sid $
Sets the TL1 source identifier (SID) of the specified control to the specified string. If the <no> option is 
used, the SID is set to “AIC”. This command is available to level 1 and 2 users.
<no> control # aid $
Sets the TL1 access identifier (AID) of the specified control to the specified string. If the <no> option 
is used, the AID is set to “UNDEFINED”. This command is available to level 1 and 2 users.
<no> control # cond $
Sets the TL1 condition (COND) of the specified control to the specified string. If the <no> option is 
used, the COND is set to “POINT #”, where # is the specified control number. This command is available 
to level 1 and 2 users.
SNMP Subconfiguration Mode
exit
Reenters global configuration mode. This command is available to level 1 and 2 users.