Cisco Cisco IOS Software Release 12.2(2)XG
NM-AIC-64, Contact Closure Network Module
AIC CLI Syntax
36
Cisco IOS Release 12.2(2)XG
<no> community $
Sets the SNMP community name to the specified string. If the <no> option is used, the community name
is set to “aic snmp”. This command is available to level 1 and 2 users.
is set to “aic snmp”. This command is available to level 1 and 2 users.
<no> noc ip-address # #.#.#.#
Sets the specified number NOC address to the specified IP address. This also enables this NOC address.
If the <no> option is used, the IP address is not used and the specified number NOC address is disabled.
This command is available to level 1 and 2 users.
If the <no> option is used, the IP address is not used and the specified number NOC address is disabled.
This command is available to level 1 and 2 users.
<no> disable alarm #
Disables the sending of traps upon change of state of the specified alarm. If the <no> option is used, the
traps are enabled for this alarm.
traps are enabled for this alarm.
<no> disable alarm-off-trap
Disables the sending of traps upon change of state to the inactive state for all alarms. If the <no> option
is used, the traps are enabled.
is used, the traps are enabled.