Cisco Cisco IOS Software Release 12.2(2)XG

Page de 48
      NM-AIC-64, Contact Closure Network Module
debug alarm-interface
39
Cisco IOS Release 12.2(2)XG
debug alarm-interface
To show real-time activities in the data channel or the management channel of the alarm interface 
controller (AIC), use the debug alarm-interface command in privileged EXEC mode. To turn off the 
output, use the undebug alarm-interface command.
debug alarm-interface slot-number {data | management} 
undebug alarm-interface slot-number {data | management} 
Syntax Description
Defaults
No default behavior or values.
Command Modes
Privileged EXEC
Command History
Examples
The following example shows sample output for the debug alarm-interface 1 management command:
AIC Slot 1:STATUS received
The following is sample output for the debug alarm-interface 1 data command:
AIC Slot 1:STATUS received
aic_fastsend:particle count=1, len=1504
aic_pak_to_txring:scattered particle count=1, tx bytes=1504, leftover=0
aic_interrupt:# 30419  gstar=0x1000000 
aic_safe_start:particle count=1, len=524
aic_pak_to_txring:scattered particle count=1, tx bytes=524, leftover=0
aic_process_TXivq:ivq - 0x42040000 at 15, slice 1
aic_interrupt:# 30420  gstar=0x1000000 
aic_process_TXivq:ivq - 0x42040000 at 16, slice 1
aic_interrupt:# 30421  gstar=0x10000000
aic_scc_rx_intr:sts_dlen=0xC5E10000, len=1504, RSTA=0xA0
aic_serial_RX_interrupt:rxtype=1, len=1504, aic_scc_rx_intr:last_rxbd has aged, 2
aic_process_RXivq:ivq - 0x60000    at 13, slice 1
aic_interrupt:# 30422  gstar=0x10000000
aic_scc_rx_intr:sts_dlen=0xC20D0000, len=524, RSTA=0xA0
aic_serial_RX_interrupt:rxtype=1, len=524, aic_process_RXivq:ivq - 0x60000    at 14, slice 
1
aic_interrupt:# 30423  gstar=0x20000000
aic_scc_rx_intr:sts_dlen=0xC00D0000, len=12, RSTA=0xA0
aic_mgmt_RX_interrupt:len=12
slot-number
Router chassis slot where the AIC network module is installed.
data
Displays AIC serial data channel and asynchronous craft port 
communication activity.
management
Displays IOS-to-AIC communication activity.
Release
Modification
12.2(2)XG
This command was introduced for the Cisco 2600 series and the 
Cisco 3600 series.