Cisco Cisco IOS Software Release 12.2(2)XG

To display the alarm interface controller (AIC) configuration setting and the information sent to the IOS 
by the AIC, use show alarm-interface command. 

show alarm-interface [slot-number] [summary]

Displays verbose message output and displays all AICs in all slot numbers on the router. 

Privileged EXEC.

The following example shows a show alarm-interface summary display:

show alarm-interface 5 sum

Alarm Interface Card in Slot 5:

Configured IP address:10.2.130.102

Status:KEEPALIVE TIMER EXPIRED

The following is an example of a verbose show alarm-interface display:

Alarm Interface Card in Slot 1: 

Configured IP address: 10.10.10.2 

Status: RUNNING 

Timer expires in < 11 min. 

Reported version: 00 00 00 01 

Expected version: 00 00 00 01 

Last Self Test result: READY 

Last Start-Up message: 

---------- 

<AIC>: Hardware Version 1, Revision A Software Version 1, Revision A 00.05, Build 0036 

Installed and running, POST passed. 

---------- 

Last Status severity: 0 

Last Status message: 

---------- 

Status 

----------

Selects AIC by entering the slot number into which the AIC was placed.

Selects the summary format for the output message

12.2(2)XG

This command was introduced for the Cisco 2600 series and the 
Cisco 3600 series.