Cisco Cisco IOS Software Release 12.2(2)XG

To display the revision level information for cable modem cards, and hardware information regarding 
the AIC, use the show diag command in privileged EXEC mode.

This command has no arguments or keywords.

No default behavior or values.

Privileged EXEC

If the slot contains a cable modem card or an AIC network module, the information displayed is the 
electrically erasable programmable read-only memory (EEPROM) contents of that card or module. 

The following shows sample output from the show diag command for a 2611 with the NM-AIC-64 
installed. 

Router# show diag

Slot 0:

C2611 2E Mainboard Port adapter, 2 ports

Port adapter is analyzed 

Port adapter insertion time unknown

EEPROM contents at hardware discovery:

Hardware Revision : 2.3

PCB Serial Number : JAD044808SG (1090473337)

Part Number : 73-2840-13

RMA History : 00

RMA Number : 0-0-0-0

Board Revision : C0

Deviation Number : 0-0

EEPROM format version 4

EEPROM contents (hex):

0x00: 04 FF 40 00 92 41 02 03 C1 18 4A 41 44 30 34 34

0x10: 38 30 38 53 47 20 28 31 30 39 30 34 37 33 33 33

0x20: 37 29 82 49 0B 18 0D 04 00 81 00 00 00 00 42 43

11.1 CA

This command was introduced.

11.2 P

This command was modified to update the sample display for the port 
adapters PA-12E/2FE, PA-E3, and PA-T3.

11.3 XA

This command was made available for Cisco IOS Release 11.3 XA.

12.0(5)XQ

This command was enhanced and made available for the Cisco 1750 router.

12.2(2)XG

This command was made available for the AIC on the Cisco 2600 series and 
the Cisco 3600 series.