Cisco Cisco IOS Software Release 12.2(11)YV

clear atm command is supported, however, help is not available.

ip urlfilter alert will be automatically configured when router is booted.

Configuring aaa new-model automatically adds radius-server authorization permit missing 
Service-Type configuration.

Enable radius-server deny authorization missing Service-Type or no radius-server deny 
authorization missing Service-Type command.

The Cisco 836 router with firewall 4.101 does not meet the DT UR-2 Loop 7 requirements. Loop 7 
requirements mandate that 6.016 Mbps downstream and 576 Kbps must be achieved at a minimum loop 
length of 1600 m.

The upstream noise margin displayed by sh dsl int atm0 with ECI DSLAM with line card A indicates 
erroneous value due to an interoperability issue with the DSLAM.

write erase does not erase a non-default IO memory value from the configuration.

Configure the IO memory value to the default value and save the configuration.

Traceback is generated when the router's logging console is enabled by using radius-server host ip 
address of radius server auth-port 1645 acct-port 1646.

Disable logging the console to eliminate the traceback message.

When the LAN interface of Cisco 836 is connected to another Cisco router, and cdp is enabled on both 
the routers, a cdp duplex mismatch is displayed.