Cisco Cisco IOS Software Release 12.2(4)B
PPPoE Session Limit
Configuration Tasks
3
Cisco IOS Release 12.2(4)B
To obtain lists of supported MIBs by platform and Cisco IOS release, and to download MIB modules,
go to the Cisco MIB website on Cisco.com at the following URL:
go to the Cisco MIB website on Cisco.com at the following URL:
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml
RFCs
No new or modified RFCs are supported by this feature.
Configuration Tasks
To configure PPPoE session limits, complete one or more of the following tasks.
•
(optional)
•
(optional)
•
(optional)
•
(optional)
•
(optional)
To verify PPPoE session limits, complete the following task:
•
(optional)
Limiting the Number of PPPoE Sessions on the Router
To specify the maximum number of PPPoE sessions that can be created on a router, use the following
command in VPDN group configuration mode:
command in VPDN group configuration mode:
PPPoE session limits configured using the pppoe limit max-sessions command take precedence over
limits configured using the pppoe limit per-vlan and pppoe limit per-mac commands.
limits configured using the pppoe limit per-vlan and pppoe limit per-mac commands.
Command
Purpose
Router(config-vpdn)# pppoe limit max-sessions
number-of-sessions
Specifies the maximum number of PPPoE sessions that
will be permitted on the router.
will be permitted on the router.
•
number-of-sessions—Maximum number of PPPoE
sessions that will be permitted on the router. The
range is from 0 to the maximum number of interfaces
on the router.
sessions that will be permitted on the router. The
range is from 0 to the maximum number of interfaces
on the router.