Cisco Cisco IOS Software Release 12.4(2)XB6
2
Release Notes for the Cisco PDSN 4.1 Feature in Cisco IOS Release 12.4(15)XR7
OL-20643-01
Introduction
Introduction
Cisco PDSN is an IOS software feature that enables a Cisco SAMI card on a Cisco 7600 Series Router
to function as a gateway between the wireless Radio Access Network (RAN) and the Internet. With Cisco
PDSN enabled on a router, a stationary or roaming mobile user can access the Internet, a corporate
intranet, or Wireless Application Protocol (WAP) services. Cisco PDSN supports both simple IP and
mobile IP operations.
to function as a gateway between the wireless Radio Access Network (RAN) and the Internet. With Cisco
PDSN enabled on a router, a stationary or roaming mobile user can access the Internet, a corporate
intranet, or Wireless Application Protocol (WAP) services. Cisco PDSN supports both simple IP and
mobile IP operations.
System Requirements
This section describes the system requirements for running Cisco IOS Release 12.4(15)XR7 to support
Cisco PDSN 4.1:
Cisco PDSN 4.1:
•
•
•
•
Memory Requirements
To install Cisco PDSN 4.1 that supports the SAMI card on the Cisco 7600 Series Router, ensure that you
meet the following memory requirements:
meet the following memory requirements:
•
Platform: Cisco 7600 Series Router
•
Bundled Image Filename: 12.4(15)XR- c7svcsami-c6ik9s-mz.124-15.XR7
•
Required Memory:
–
Flash: 256 MB
–
DRAM: 2048 MB
Hardware Supported
Cisco IOS Release 12.4(15)XR7 is optimized for the SAMI card on the Cisco 7600 Series Router. You
can use the Hardware-Software Compatibility Matrix tool to search for hardware components that are
supported on a Cisco platform and an IOS release.
can use the Hardware-Software Compatibility Matrix tool to search for hardware components that are
supported on a Cisco platform and an IOS release.
Note
You must have a valid Cisco.com account to log in to this tool: