Cisco Cisco IOS Software Release 12.4(2)XB6
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Field-Programmable Device Upgrades
How to Upgrade Field-Programmable Devices
11
Field-Programmable Device Upgrades
Verifying and Troubleshooting Field-Programmable Device Upgrades
This section describes how to get information about FPD image packages, such as current and minimum
FPD image package versions, the default FPD image package, and FPD upgrade progress.
FPD image package versions, the default FPD image package, and FPD upgrade progress.
This section provides information you can use to verify and troubleshoot FPD upgrades in the following
subsections:
subsections:
•
•
•
•
Verifying the FPD Upgrade Progress
Use the show upgrade fpd progress command to view a “snapshot” of the upgrade progress while an
FPD image package upgrade is taking place. The following example shows that the FPD image is being
updated, the approximate amount of time needed to perform the update, and the amount of time the FPD
update has taken so far:
FPD image package upgrade is taking place. The following example shows that the FPD image is being
updated, the approximate amount of time needed to perform the update, and the amount of time the FPD
update has taken so far:
Router# show upgrade fpd progress
FPD Image Upgrade Progress Table:
==== =================== ====================================================
Approx.
Field Programmable Time Elapsed
Slot Card Type Device : "ID-Name" Needed Time State
==== =================== ================== ========== ========== ===========
npe NPE-G2 IOFPGA 1-NPEG2 I/O FPGA 00:01:00 00:00:23 Updating...
==== =================== ====================================================
Displaying Current and Minimum Required FPD Image Versions
To display the current version of FPD images on the cards installed on your router, use the show
hw-module all fpd command or the show hw-module slot fpd command. These commands can be used
to identify information about FPD images on any FPD-capable cards.
hw-module all fpd command or the show hw-module slot fpd command. These commands can be used
to identify information about FPD images on any FPD-capable cards.