Cisco Cisco IOS Software Release 12.4(2)XB6

In the following example, a Cisco IOS image and the FPD image package file that supports that 
particular Cisco IOS image (c7200-fpd-pkg.124.pkg) are copied to the disk2: Flash Disk from a TFTP 
server. The router is then configured to boot using the new Cisco IOS image and reloaded. 

When the router reboots using the new Cisco IOS image, the FPD version check that occurs at bootup 
detects an FPD incompatibility and then initiates the FPD image upgrade process. The FPD image is 
upgraded automatically. After the system messages indicate that the FPD upgrade was successful, the 
show hw-module slot 0 fpd command and the show hw-module all fpd command are entered to verify 
the upgrade procedure. FPD messages are italicized for emphasis.

Router# copy tftp://hostname/path/c7200-fpd-pkg.124.pkg disk2:

Destination filename [c7200-fpd-pkg.124.pkg]? 

Accessing tftp://hostname/path/c7200-fpd-pkg.124.pkg...

Loading path/c7200-fpd-pkg.124.pkg from 223.255.254.254 (via 

FastEthernet0):!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[OK - 22870596 bytes]

22870596 bytes copied in 133.476 secs (171346 bytes/sec)

Router# dir disk2:

Directory of disk2:/

    2  -rw-     1415168  Apr 10 2000 00:36:26 +00:00  c7200-fpd-pkg.124-test.pkg

    4  -rw-    24850300   Apr 9 2000 21:42:02 +00:00  c7200p-ik9s-mz

Router# reload

Proceed with reload? [confirm]

*Apr 10 00:36:39.331: %SYS-5-RELOAD: Reload requested by console. Reload Reason: Reload 

Command.

System Bootstrap, Version 12.4(4r)XD, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 2005 by cisco Systems, Inc.

Socket jumper: not present Failsafe jumper: present = normal

FPGA revision 0x00000013

C7200 platform with 1046528 Kbytes of main memory

Readonly ROMMON initialized

rommon 1 > boot disk2:c7200p-ik9s-mz

Self decompressing the image : 

##########################################################################################

##########################################################################################

##########################################################################################

##########################################################################################

################################# [OK]

              Restricted Rights Legend