Cisco Cisco IOS Software Release 12.4(22)XR
2
Release Notes for Cisco PDSN Release 5.2 in IOS Release 12.4(22)XR4
OL-22147-01
Introduction
Introduction
Cisco PDSN is an IOS software feature that enables a SAMI card on a Cisco 7600 Series Router to
function as a gateway between the wireless Radio Access Network (RAN) and the Internet. With Cisco
PDSN enabled on a router, a stationary or roaming mobile user can access the Internet, a corporate
intranet, or Wireless Application Protocol (WAP) services. Cisco PDSN supports both simple IP and
mobile IP operations.
function as a gateway between the wireless Radio Access Network (RAN) and the Internet. With Cisco
PDSN enabled on a router, a stationary or roaming mobile user can access the Internet, a corporate
intranet, or Wireless Application Protocol (WAP) services. Cisco PDSN supports both simple IP and
mobile IP operations.
System Requirements
This section describes the system requirements for running Cisco IOS Release 12.4(22)XR4:
•
•
•
•
Memory Requirements
To install Cisco PDSN Release 5.2 that supports the SAMI card on the Cisco 7600 Series Router, ensure
that you meet the following memory requirements:
that you meet the following memory requirements:
•
Platform: Cisco 7600 Series Router
•
Software/Feature Set: PDSN
•
Image Name: 12.4(22)XR4 – c7svcsami-c6ik9s-mz.124.22.XR (This file is a bundled image.)
•
Required Memory:
–
Flash: 256 MB
–
DRAM: 2048 MB
•
Runs from: RAM
Hardware Supported
Cisco IOS Release 12.4(22)XR4 is optimized for the SAMI card on the Cisco 7600 Series Router.
You can use the Hardware-Software Compatibility Matrix tool to search for hardware components that
are supported on a Cisco platform and an IOS release.
are supported on a Cisco platform and an IOS release.
Note
You must have a valid Cisco.com account to log in to this tool: