Cisco Cisco IOS Software Release 12.4(22)XR Références techniques
52
Command Reference for Cisco PDSN Release 5.1 in IOS Release 12.4(22)XR1
OL-20781-01
cdma pdsn attribute send b1 auth-req
cdma pdsn attribute send b1 auth-req
To send the framed IP address in access-request message, use the cdma pdsn attribute send b1
auth-req command in global configuration mode. The command can be enabled for the
authentication-request option. Use the no form of the command to disable this feature.
auth-req command in global configuration mode. The command can be enabled for the
authentication-request option. Use the no form of the command to disable this feature.
cdma pdsn attribute send b1 auth-req
no cdma pdsn attribute send b1 auth-req
Syntax Description
Defaults
Disabled.
Command Modes
Global configuration.
Command History
Usage Guidelines
Disable the radius-server attribute 8 include-in-access-req command to use the cdma pdsn attribute
send b1 auth-req command for sending the framed-ip-address attribute. To configure the CLI command
cdma pdsn attribute send b1 auth-req, the CLI command ip mobile foreign-agent send-mn-address
must be configured already. Without configuring the ip mobile foreign-agent send-mn-address CLi
command, you can not configure cdma pdsn attribute send b1 auth-req.
send b1 auth-req command for sending the framed-ip-address attribute. To configure the CLI command
cdma pdsn attribute send b1 auth-req, the CLI command ip mobile foreign-agent send-mn-address
must be configured already. Without configuring the ip mobile foreign-agent send-mn-address CLi
command, you can not configure cdma pdsn attribute send b1 auth-req.
Similarly, if both the CLI commands, ip mobile foreign-agent send-mn-address and cdma pdsn
attribute send b1 auth-req are enabled, then to disable the CLI command ip mobile foreign-agent
send-mn-address, first disable the cdma pdsn attribute send b1 auth-req CLI command.
attribute send b1 auth-req are enabled, then to disable the CLI command ip mobile foreign-agent
send-mn-address, first disable the cdma pdsn attribute send b1 auth-req CLI command.
Examples
The following example shows how to enable the cdma pdsn attribute send b1 auth-req command:
Router (config)# cdma pdsn attribute send b1 auth-req
Command
Description
auth-req
Sends attribute in an access-request message during PAP/CHAP.
Release
Modification
12.4(22)XR1
This command is introduced.