Cisco Cisco IOS Software Release 12.4(22)XR Références techniques

To send the packet control function (PCF) IP address in an access-request message, use the cdma pdsn 
attribute send d3 {auth-req | fa-chap | online-req} command in global configuration mode. You can 
enable this command for three options: to send an authentication-request (auth-req), to send the d3 
attribute in an access-request message during a MIP call (fa-chap) and to send the d3 attribute in prepaid 
online access-request message (online-req). Use the no form of the command to disable this feature. 

Disabled.

Global configuration. 

The following example shows how to enable the cdma pdsn attribute send d3 command to use the 
auth-req option, or fa-chap option, or online-req option:

Router (config)# cdma pdsn attribute send d3 auth-req 

or

Router (config)# cdma pdsn attribute send d3 fa-chap

or

Router (config)# cdma pdsn attribute send d3 online-req 

Sends attribute in an access-request message during PAP/CHAP.

Sends d3 attribute in a access-request message during a MIP call.

Sends d3 attribute in a prepaid online access-request message.

12.4(22)XR1

This command is introduced.