Cisco Cisco IOS Software Release 12.4(2)XB6 Références techniques
-116
Cisco Broadband Wireless Gateway 1.2 Command Reference, IOS Release 12.4(15)XL3
OL-14681-01
Chapter Cisco Broadband Wireless Gateway 1.2 Command Reference, IOS Release 12.4(15)XL3
reference-point r6 keepalive max-failures-allowed
reference-point r6 keepalive max-failures-allowed
To configure the the number of times the BWG attempts to resend the KeepAlive request before tearing
down the session, use the reference-point r6 keepalive max-failures-allowed command in base station
submode configuration. Use the no form of the command to disable this feature.
down the session, use the reference-point r6 keepalive max-failures-allowed command in base station
submode configuration. Use the no form of the command to disable this feature.
reference-point r6 keepalive max-failures maximum-retries
no reference-point r6 keepalive max-failures maximum-retries
Syntax Description
Defaults
The default setting is disabled.
Command Modes
Base station configuration submode.
Command History
Examples
The following example illustrates the default behavior for the reference-point r6 keepalive
max-failures command:
max-failures command:
wimax agw base-station group default
reference-point r6 keepalive timeout 30
reference-point r6 response retransmit 10
reference-point r6 response timeout 10R
maximum-retries
Specifies the number of times the BWG attempts to resend the KeepAlive
request before tearing down the session.
request before tearing down the session.
Release
Modification
12.4(15)XL1
This command was introduced.