Cisco Cisco IOS Software Release 12.2(33)SRE
MPLS VPN—VRF CLI for IPv4 and IPv6 VPNs
Additional References
17
Cisco IOS Release 12.2(33)SRB
interface Ethernet0/0
vrf forwarding vrf2
ip address 10.50.1.2 255.255.255.0
ipv6 address 2001:0DB8:0:1::/64
!
interface Ethernet0/1
ip vrf forwarding vrf1
ip address 10.60.1.2 255.255.255.0
ipv6 address 2001:0DB8:1 :1::/64
In this example, all addresses (IPv4 and IPv6) defined for interface Ethernet0/0 are in VRF vrf2. For the
interface Ethernet0/1, the IPv4 address is defined in VRF vrf1 but the IPv6 address is in the global
IPv6 routing table.
interface Ethernet0/1, the IPv4 address is defined in VRF vrf1 but the IPv6 address is in the global
IPv6 routing table.
Additional References
The following sections provide references related to the MPLS VPN—VRF CLI for IPv4 and IPv6 VPNs
feature.
feature.
Related Documents
Standards
MIBs
Related Topic
Document Title
Configuration tasks for MPLS VPNs
Part 4: MPLS Virtual Private Networks,” Cisco IOS Multiprotocol
Label Switching Configuration Guide, Release 4
Commands for configuring MPLS and MPLS VPNs
Cisco IOS Multiprotocol Label Switching Command Reference,
Release 12.2SR
Release 12.2SR
Configuration tasks for MPLS
“Configuring Multiprotocol Label Switching”
chapter in the
Cisco IOS Multiprotocol Label Switching Configuration Guide,
Release 4
Release 4
Standard
Title
No new or modified standards are supported by this
feature, and support for existing standards has not been
modified by this feature.
feature, and support for existing standards has not been
modified by this feature.
—
MIB
MIBs Link
No new or modified MIBs are supported by this
feature, and support for existing MIBs has not been
modified by this feature.
feature, and support for existing MIBs has not been
modified by this feature.
To locate and download MIBs for selected platforms, Cisco IOS
releases, and feature sets, use Cisco MIB Locator found at the
following URL:
releases, and feature sets, use Cisco MIB Locator found at the
following URL: