Cisco Cisco IOS Software Release 12.2(35)SE

For /directory/image-name.tar, specify the directory (optional) and the image to download. Directory 
and image names are case sensitive.

This example shows how to download an image from a TFTP server at 198.30.20.19 and to overwrite 
the image on the switch:

Switch# archive download-sw /overwrite tftp://198.30.20.19

You can also download the image file from the TFTP server to the switch and keep the current image by 
replacing the /overwrite option with the /leave-old-sw option.

For additional recovery procedures, see the “Troubleshooting” chapter in the software configuration 
guide for this release.

You can assign IP information to your switch by using these methods:

The Express Setup program or the HP Onboard Administrator program described in the getting 
started guide.

The CLI-based setup program, as described in the hardware installation guide.

The DHCP-based autoconfiguration, as described in the software configuration guide.

Manually assigning an IP address, as described in the software configuration guide.

VLAN Flex Links load balancing to configure a Flex Links pair to allow both ports to forward traffic 
for some VLANs (mutually exclusive)

Link Layer Discovery Protocol (LLDP) and LLDP Media Endpoint Discovery (LLDP-MED) for 
interoperability with third-party IP phones

VLAN aware port security option to shut down the VLAN on the port when a violation occurs, 
instead of shutting down the entire port

DHCP Snooping Statistics show and clear commands to display and remove DHCP snooping 
statistics in summary or detail form

SNMP support for the Port Error Disable MIB

Support for the Time Domain Reflectometry MIB