Cisco Cisco IOS Software Release 12.2(35)SE 發佈版本通知
6
Release Notes for the Cisco Catalyst Blade Switch 3020 for HP, Cisco IOS Release 12.2(37)SE and Later
OL-12577-03
Installation Notes
For /directory/image-name.tar, specify the directory (optional) and the image to download. Directory
and image names are case sensitive.
and image names are case sensitive.
This example shows how to download an image from a TFTP server at 198.30.20.19 and to overwrite
the image on the switch:
the image on the switch:
Switch# archive download-sw /overwrite tftp://198.30.20.19
/cbs30x0lanbase-mz
You can also download the image file from the TFTP server to the switch and keep the current image by
replacing the /overwrite option with the /leave-old-sw option.
replacing the /overwrite option with the /leave-old-sw option.
Recovering from a Software Failure
For additional recovery procedures, see the “Troubleshooting” chapter in the software configuration
guide for this release.
guide for this release.
Installation Notes
You can assign IP information to your switch by using these methods:
•
The Express Setup program or the HP Onboard Administrator program described in the getting
started guide.
started guide.
•
The CLI-based setup program, as described in the hardware installation guide.
•
The DHCP-based autoconfiguration, as described in the software configuration guide.
•
Manually assigning an IP address, as described in the software configuration guide.
New Software Features
•
VLAN Flex Links load balancing to configure a Flex Links pair to allow both ports to forward traffic
for some VLANs (mutually exclusive)
for some VLANs (mutually exclusive)
•
Link Layer Discovery Protocol (LLDP) and LLDP Media Endpoint Discovery (LLDP-MED) for
interoperability with third-party IP phones
interoperability with third-party IP phones
•
VLAN aware port security option to shut down the VLAN on the port when a violation occurs,
instead of shutting down the entire port
instead of shutting down the entire port
•
DHCP Snooping Statistics show and clear commands to display and remove DHCP snooping
statistics in summary or detail form
statistics in summary or detail form
•
SNMP support for the Port Error Disable MIB
•
Support for the Time Domain Reflectometry MIB