Cisco Cisco IOS Software Release 12.2(35)SE

These sections describes the hardware and software requirements for using the device manager:

NME-XD-24ES-1S-P

24 10/100 PoE ports, 1 SFP module 
port, 2 StackWise connector ports, 
extended double-wide

Cisco IOS Release 12.2(25)EZ

NME-XD-48ES-2S-P

48 10/100 PoE ports, 2 SFP module 
ports, no StackWise connector ports, 
extended double-wide

Cisco IOS Release 12.2(25)EZ

SFP modules (Catalyst 3750, 3560, 
and 2970)

1000BASE-CWDM

6

, -LX, SX, -T, 

-ZX

100BASE-FX MMF

7

Cisco IOS Release 12.2(18)SE

Cisco IOS Release 12.2(20)SE

SFP modules (Catalyst 2960)

1000BASE-BX, -CWDM, -LX/LH, 
-SX, -ZX

100BASE-BX, FX, -LX

Cisco IOS Release 12.2(25)FX

XENPAK modules

8

XENPAK-10-GB-ER, 
XENPAK-10-GB-LR, 
XENPAK-10-GB-LX4, 
XENPAK-10-GB-SR, and 
XENPAK-10-GB-CX4

Cisco IOS Release 12.2(18)SE

Redundant power systems

Cisco RPS 675 Redundant Power 
System

Cisco RPS 300 Redundant Power 
System (supported only on the 
Catalyst 2960 switch)

Supported on all software releases

1.

SFP = small form-factor pluggable

2.

PoE = Power over Ethernet

3.

Each uplink port is considered a single interface with dual front ends (RJ-45 connector and SFP module slot). The dual front ends are not redundant 
interfaces, and only one port of the pair is active.

4.

SFP = small form-factor pluggable

5.

Cisco EtherSwitch service module

6.

CWDM = coarse wavelength-division multiplexer

7.

MMF = multimode fiber

8.

XENPAK modules are only supported on the Catalyst 3750G-16TD switches.