Cisco Cisco IOS Software Release 12.2(35)SE

Cisco IOS 12.2(40)EX1 and later is only compatible with Cisco Network Assistant 5.3 and later. You 
can download Network Assistant from this URL:

http://www.cisco.com/pcgi-bin/tablebuild.pl/NetworkAssistant

For more information about Cisco Network Assistant, see the Release Notes for Cisco Network Assistant 
on Cisco.com.

These are the procedures for downloading software. Before downloading software, read this section for 
important information:

The Cisco IOS image is stored as a bin file in a directory that is named with the Cisco IOS release. 
A subdirectory contains the files needed for web management. The image is stored on the system board 
flash device (flash:).

You can use the show version privileged EXEC command to see the software version that is running on 
your switch. The second line of the display shows the version.

Although the show version output always shows the software image running on the switch, the model 
name shown at the end of this display is the factory configuration (IP base feature set or IP services 
feature set) and does not change if you upgrade the software license.

You can also use the dir filesystem: privileged EXEC command to see the directory names of other 
software images that you might have stored in flash memory.

Windows 2003

None

6.0 or 7.0

1.5 or 2.0

Vista

None

6.0 or 7.0

1.5 or 2.0

1.

Service Pack 1 or higher is required for Internet Explorer 5.5.