Cisco Cisco IOS Software Release 12.2(35)SE

These sections describes the hardware and software requirements for using the device manager:

 lists the minimum hardware requirements for running the device manager.

 lists the supported operating systems and browsers for using the device manager. The device 

manager verifies the browser version when starting a session to ensure that the browser is supported.

The device manager does not require a plug-in.

You cannot create and manage switch clusters through the device manager. To create and manage switch 
clusters, use the command-line interface (CLI) or the Network Assistant application. 

3.

Each uplink port is considered a single interface with dual front ends (RJ-45 connector and SFP module slot). The dual front ends are not redundant 
interfaces, and only one port of the pair is active.

4.

Cisco EtherSwitch service module

5.

CWDM = coarse wavelength-division multiplexer

6.

MMF = multimode fiber

7.

XENPAK modules are only supported on the Catalyst 3750G-16TD switches.

Intel Pentium II

1

1.

We recommend Intel Pentium 4.

64 MB

2

2.

We recommend 256-MB DRAM.

256

1024 x 768

Small

1.

Service Pack 1 or higher is required for Internet Explorer 5.5.

Windows 2000

None

5.5 or 6.0

7.1

Windows XP

None

5.5 or 6.0

7.1