Cisco Cisco IOS Software Release 12.2(35)SE

For //location, specify the IP address of the TFTP server.

For /directory/image-name.tar, specify the directory (optional) and the image to download. Directory 
and image names are case sensitive.

This example shows how to download an image from a TFTP server at 198.30.20.19 and to overwrite 
the image on the switch:

Switch# archive download-sw /overwrite

You can also download the image file from the TFTP server to the switch and keep the current image by 
replacing the /overwrite option with the /leave-old-sw option.

For recovery procedures, see the “Troubleshooting” chapter in the software configuration guide for 
this release.

You can assign IP information to your switch by using these methods:

The CLI-based setup program, as described in the switch hardware installation guide.

The DHCP-based autoconfiguration, as described in the switch software configuration guide.

Manually assigning an IP address, as described in the switch software configuration guide.

These sections describe the new supported hardware and the new software features provided in this 
release: 

For a list of all supported hardware, see the 

.