Cisco Cisco IOS Software Release 12.2(35)SE
17
Release Notes for the Cisco Catalyst Blade Switch 3020 for HP, Cisco IOS Release 12.2(46)SE
OL-16493-01
Documentation Updates
Error Message VQPCLIENT-2-TOOMANY: Interface [chars] shutdown by active host limit.
Explanation
The system has shut down the specified interface because too many hosts have requested
access to that interface. [chars] is the interface name.
Recommended Action
To enable the interface, remove the excess hosts, and enter the no shutdown
interface configuration command.
Error Message VQPCLIENT-3-VLANNAME: Invalid VLAN [chars] in response.
Explanation
The VLAN membership policy server (VMPS) has specified a VLAN name that is
unknown to the switch. [chars] is the VLAN name.
Recommended Action
Ensure that the VLAN exists on the switch. Verify the VMPS configuration by
entering the show vmps privileged EXEC command.
Error Message WCCP-5-CACHEFOUND: Web Cache [IP_address] acquired.
Explanation
The switch has acquired the specified web cache. [IP_address] is the web cache IP
address.
Recommended Action
No action is required.
Error Message WCCP-1-CACHELOST: Web Cache [IP_address] lost.
Explanation
The switch has lost contact with the specified web cache. [IP_address] is the web cache
IP address.
Recommended Action
Verify the operation of the web cache by entering the show ip wccp web-cache
privileged EXEC command.
Deleted System Messages
These system messages were deleted:
Error Message %VQPCLIENT-2-INITFAIL: Platform-specific VQP initialization failed.
Quitting
Quitting
Error Message %VQPCLIENT-2-IPSOCK: Could not obtain IP socket
Error Message %VQPCLIENT-7-NEXTSERV: Trying next VMPS [IP_address]
Error Message %VQPCLIENT-7-PROBE: Probing primary server [IP_address]
Error Message %VQPCLIENT-2-PROCFAIL: Could not create process for VQP. Quitting