Cisco Cisco IOS Software Release 12.2(35)SE
21
Release Notes for the Catalyst 3750 Metro Switch Cisco IOS Release 12.2(46)SE
OL-16490-01
Resolved Caveats
•
CSCsj10198
When a per-port per-VLAN policy map (a hierarchical VLAN-based policy map) is attached to a
VLAN interface, and you remove the child-policy policer from the policy map and then add it back,
the policy map fails to re-attach to the same SVI
VLAN interface, and you remove the child-policy policer from the policy map and then add it back,
the policy map fails to re-attach to the same SVI
The workaround is to delete the child policy, which removes it from the parent policy. Then recreate
the child policy (with the same or a different name) and reference it in the parent policy. The parent
policy then successfully attaches to the SVI.
the child policy (with the same or a different name) and reference it in the parent policy. The parent
policy then successfully attaches to the SVI.
•
CSCsj27896
When a class-map entry is added or modified, a delay of several seconds can occur if the switch
already has many policy maps defined. For example, a 6- second delay occurs when a new class map
is added to the a switch that already has 400 hierarchical QoS policies defined.
already has many policy maps defined. For example, a 6- second delay occurs when a new class map
is added to the a switch that already has 400 hierarchical QoS policies defined.
The delay occurs even if the policy maps are not attached to a switch interface. The console might
also be unresponsive when this occurs.
also be unresponsive when this occurs.
There is no workaround.
•
CSCsj99343
When you make a topology change in the REP ring segment, the MPLS flows on the switch might
take several seconds to recover.
take several seconds to recover.
There is no workaround.
•
CSCsk65142
When you enter the boot host retry timeout global configuration command to specify the amount
of time that the client should keep trying to download the configuration and you do not enter a
timeout value, the default value is zero, which should mean that the client keeps trying indefinitely.
However, the client does not keep trying to download the configuration.
of time that the client should keep trying to download the configuration and you do not enter a
timeout value, the default value is zero, which should mean that the client keeps trying indefinitely.
However, the client does not keep trying to download the configuration.
The workaround is to always enter a non zero value for the timeout value when you enter the boot
host retry timeout timeout-value command.
host retry timeout timeout-value command.
Resolved Caveats
These are the caveats that have been resolved in this release:
•
CSCsa73179
A switch no longer fails under these conditions:
–
OSPF is in the switch image.
–
You enter the RIP no default-information router configuration command.
•
CSCse07265
If you configure IP SLA to generate a syslog message for a reaction trap and an operation with a
trigger of timeout or connectionless, a syslog message now appears when triggered.
trigger of timeout or connectionless, a syslog message now appears when triggered.
•
CSCsi01526
Traceback messages no longer appear if you enter the no switchport interface configuration
command to change a Layer 2 interface from a port channel to a routed port.
command to change a Layer 2 interface from a port channel to a routed port.