Cisco Cisco IOS Software Release 12.2(35)SE

These sections describe the new supported hardware and the new software features provided in this 
release: 

For a list of all supported hardware, see the 

. 

These are the new software features for Cisco IOS Release 12.2(46)SE:

EOT and IP SLAs EOT static route support to identify when a preconfigured static route or a DHCP 
route goes down

Counter and timer enhancements to Resilient Ethernet Protocol (REP) support

Support for HSRP Version 2 (HSRPv2)

DHCP server port-based address allocation for the preassignment of an IP address to a switch port.

Support for the CISCO-NAC-NAD and CISCO-PAE MIBs

Beginning with this release, entering the no port-type interface configuration command on a port 
has the same effect as entering the default port-type interface command. It sets the interface to the 
default port type: NNI for Gigabit Ethernet interfaces or UNI for Fast Ethernet interfaces. In 
previous releases, entering the no-port type command set any interface to UNI.

 lists the minimum software release (after the first release) required to support the major features 

of the Cisco ME 3400 switch. Features not listed are supported in all releases.

EOT and IP SLAs EOT static route support

12.2(46)SE

REP counter and timer enhancements 

12.2(46)SE

HSRPv2

12.2(46)SE

DHCP server port-based address allocation

12.2(46)SE

DHCP-based autoconfiguration and image update

12.2(44)SE

Configurable small-frame arrival threshold

12.2(44)SE

Source Specific Multicast (SSM) mapping for multicast applications

12.2(44)SE