Cisco Cisco IOS Software Release 12.2(27)SBC

The following output shows that there are two objects. Object 1 has been configured with a weight of 10 
“down,” and object 2 has been configured with a weight of 20 “up.” Object 1 is down (expressed as 0/10) 
and object 2 is up. The total weight of the tracked list is 20 with a maximum of 30 (expressed as 20/30). 
The “up” threshold is 20, so the list is “up.”

Router# show track

Track 6

List threshold weight

Threshold weight is Up (20/30)

1 change, last change 00:00:08

object 1 Down (0/10)

object 2 weight 20 Up (20/30)

Threshold weight down 10 up 20

Tracked by:

HSRP Ethernet0/3 1

The following example shows information about the Boolean configuration:

Router# show track

Track 3

List boolean and 

Boolean AND is Down

1 change, last change 00:00:08

object 1 not Up

object 2 Down

Tracked by:

HSRP Ethernet0/3 1

Table 2

 describes the significant fields shown in the displays.

First-hop interface is

Displays the first-hop interface.

Object type

Object type that is being tracked.

Poll Interval

Interval (in seconds) in which the tracking process polls the object. 

Time to next poll

Period of time, in seconds, until the next polling of the object.

Track

Object number that is being tracked.

Boolean AND is Down

Each object defined in the list must be in a down state.

1 change, last change

Number of times that the state of a tracked object has changed and the 
time (in hh:mm:ss) since the last change.

Tracked by

Client process that is tracking the object; in this case, HSRP.