Cisco Cisco IOS Software Release 12.2(27)SBC

To display information about objects that are tracked by the tracking process, use the show track 
command in privileged EXEC mode.

show track [object-number [brief] | interface [brief] | ip route [brief] | resolution | timers]

Privileged EXEC

Use this command to display information about objects that are tracked by the tracking process. When 
no arguments or keywords are specified, information for all objects is displayed.

The following example shows information about the state of IP routing on the interface that is being 
tracked:

Router# show track 1

Track 1

Interface Ethernet0/2 ip routing

IP routing is Down (no IP addr)

1 change, last change 00:01:08

Tracked by:

HSRP Ethernet0/3 1

(Optional) Object number that represents the object to be tracked. The range is 
from 1 to 500. 

(Optional) Displays a single line of information related to the preceding 
argument or keyword.

(Optional) Displays tracked interface objects. 

(Optional) Displays tracked IP-route objects. 

(Optional) Displays resolution of tracked parameters.

(Optional) Displays polling interval timers.

12.2(15)T

This command was introduced.

12.3(8)T

The output was enhanced to include the track-list objects.

12.2(25)S

This command was integrated into Cisco IOS Release 12.2(25)S.

12.4(2)T

The output was enhanced to display stub objects.

12.2(28)SB

This command was integrated into Cisco IOS Release 12.2(28)SB.