Cisco Cisco IOS Software Release 12.2(53)SE

You can assign IP information to your switch by using these methods:

The CLI-based setup program, as described in the hardware installation guide.

The DHCP-based autoconfiguration, as described in the software configuration guide.

Manually assigning an IP address, as described in the software configuration guide.

Support for the ip vrf forwarding vrf-name server-group configuration and the ip radius 
source-interface global configuration VRF-Aware RADIUS commands. For more information, see the 

.

You should review this section before you begin working with the switch. These are known limitations 
that will not be fixed, and there is not always a workaround. Some features might not work as 
documented, and some features could be affected by recent changes to the switch hardware or software.