Cisco Cisco IOS Software Release 12.2(53)SE
3
Release Notes for the Cisco Catalyst Blade Switch 3130 and 3032 for Dell, Cisco IOS Release 12.2(53)SE and Later
OL-21143-02
System Requirements
Caution
The Cisco Catalyst Blade Switch 3130 for Dell does not support switch stacks with other types of blade
switches as members. Combining the Cisco Catalyst Blade Switch 3130 for Dell with other types of
blade switches in a switch stack might cause the switch to work improperly or to fail.
switches as members. Combining the Cisco Catalyst Blade Switch 3130 for Dell with other types of
blade switches in a switch stack might cause the switch to work improperly or to fail.
Device Manager System Requirements
These sections describe the hardware and software requirements for using the device manager:
•
•
Hardware Requirements
lists the minimum hardware requirements for running the device manager.
Cisco X2 transceiver modules
X2-10GB-SR
X2-10GB-LRM
X2-10GB-CX4
X2-10GB-LRM
X2-10GB-CX4
X2-10GB-LR
X2-10GB-LX4
X2-10GB-LX4
12.2(40)EX3
12.2(46)SE
SFP modules
3
GLC-T
GLC-SX-MM
GLC-LH-SM
GLC-SX-MM
GLC-LH-SM
12.2(40)EX3
Supports OneX
(CVR-X2-SFP10G) and these
SFP+ modules
(CVR-X2-SFP10G) and these
SFP+ modules
(For the Catalyst Blade Switch
3130)
3130)
SFP-10G-SR
SFP-10G-LR
SFP-10G-LRM
SFP-10G-LR
SFP-10G-LRM
Only version 02 or later CX1
4
cables
are supported:
SFP-H10GB-CU1M
SFP-H10GB-CU3M
SFP-H10GB-CU5M
SFP-H10GB-CU3M
SFP-H10GB-CU5M
Cisco IOS Release 12.2(53)SE
1.
This switch supports only the IP base software image.
2.
X2 supported only on the CBS3130X-S model.
3.
SFP = small form-factor pluggable
4.
The CX1 cables are used with the OneX converters.
Table 1
Cisco Catalyst Blade Switch 3130 for Dell and 3032 for Dell Supported Hardware (continued)
Switch Hardware
Description
Supported by Minimum Cisco IOS Release
Table 2
Minimum Hardware Requirements
Processor Speed
DRAM
Number of Colors
Resolution
Font Size
233 MHz minimum
1
1.
We recommend 1 GHz.
512 MB
2
2.
We recommend 1-GB DRAM.
256
1024 x 768
Small