Cisco Cisco IOS Software Release 12.2(55)SE
6
Release Notes for the Cisco IE 3000 Switch, Cisco IOS Release 12.2(55)SE and Later
OL-23061-05
Upgrading the Switch Software
Upgrading a Switch by Using the CLI
This procedure is for copying the combined tar file to the switch. You copy the file to the switch from a
TFTP server and extract the files. You can download an image file and replace or keep the current image.
TFTP server and extract the files. You can download an image file and replace or keep the current image.
Note
Make sure that the compact flash card is inserted into the switch before downloading the software.
To download software, follow these steps:
Step 1
Use
to identify the file that you want to download.
Step 2
Download the software image file:
a.
If you are a registered customer, go to this URL and log in.
b.
Navigate to Switches > Industrial Ethernet Switches.
c.
Navigate to your switch model.
d.
Click IOS Software, then select the latest IOS release.
e.
Download the image you identified in
Step 3
Copy the image to the appropriate TFTP directory on the workstation, and make sure that the TFTP
server is properly configured.
For more information, see the Cisco IE 3000 Switch Software Configuration Guide.
server is properly configured.
For more information, see the Cisco IE 3000 Switch Software Configuration Guide.
Step 4
Log into the switch through the console port or a Telnet session.
Step 5
(Optional) Ensure that you have IP connectivity to the TFTP server by entering this privileged EXEC
command:
command:
Switch# ping tftp-server-address
For more information about assigning an IP address and default gateway to the switch, see the software
configuration guide for this release.
configuration guide for this release.
Step 6
Download the image file from the TFTP server to the switch. If you are installing the same version of
software that is currently on the switch, overwrite the current image by entering this privileged EXEC
command:
software that is currently on the switch, overwrite the current image by entering this privileged EXEC
command:
Switch# archive download-sw /overwrite /reload
tftp:
[[//location]/directory]/image-name.tar
The /overwrite option overwrites the software image in flash memory with the downloaded one.
The /reload option reloads the system after downloading the image unless the configuration has been
changed and not saved.
changed and not saved.
For //location, specify the IP address of the TFTP server.
For /directory/image-name.tar, specify the directory (optional) and the image to download. Directory
and image names are case sensitive.
and image names are case sensitive.
This example shows how to download an image from a TFTP server at 198.30.20.19 and to overwrite
the image on the switch:
the image on the switch:
Switch# archive download-sw /overwrite tftp://198.30.20.19/image-name.tar