Cisco Cisco Aironet 1552WU Outdoor Access Point Guide De Montage
Mounting the Access Point on a Pole
6
Mounting Instructions for Cisco Aironet 1550 Series Outdoor Access Point Pole-Mount Kits
78-20059-01
Step 2
Screw the M8 nut onto the pole clamp bracket support bolt, and hand-tighten the
nut just enough to prevent the bolt from falling off.
nut just enough to prevent the bolt from falling off.
Mounting the Access Point on a Pole
To mount the access point onto a vertical pole or streetlight pole, follow these
steps:
steps:
Step 1
Select a mounting location on the pole to mount the access point. You can attach
the access point to any pole from 2 to 16 inches (5.1 to 40.6 cm) in diameter.
the access point to any pole from 2 to 16 inches (5.1 to 40.6 cm) in diameter.
Note
If you are using a streetlight power tap adapter, position the access point
within 3 feet (1 m) of the outdoor light control.
within 3 feet (1 m) of the outdoor light control.
For poles larger than 3.5 inches (8.9 cm) in diameter, mount the pole clamp
bracket assembly to a pole using two metal straps. Following the instructions
provided with the banding strap tool (BAND IT; AIR-BAND-INST-TL=), loop
each metal strap twice through the slots on the strap bracket.
bracket assembly to a pole using two metal straps. Following the instructions
provided with the banding strap tool (BAND IT; AIR-BAND-INST-TL=), loop
each metal strap twice through the slots on the strap bracket.
Caution
Do not place the metal straps in the large open area between the pole clamp
bracket and the strap brackets, because this arrangement does not properly secure
the access point.
bracket and the strap brackets, because this arrangement does not properly secure
the access point.
shows the metal straps and the clamp bracket assembly on a pole with a
diameter larger than 3.5 inches (8.9 cm).
1
M8 x1.25 x16 bolts (with
lock washers)
lock washers)
3
Strap bracket (shown positioned for
11 to 16-in. diameter pole)
11 to 16-in. diameter pole)
2
Pole clamp bracket