Cisco Cisco Email Security Appliance C190 Guide De Montage

This appendix describes pinout information for the 10/100/1000BaseT ports and the RJ-45 to DB-9 ports, 
and the RJ-45 cables for the console port.

This chapter includes the following sections:

The Cisco 170 series appliance supports 10/100/1000BaseT ports. You must use at least a Category 5 
cable for 100/1000baseT operations, but a Category 3 cable can be used for 10BaseT operations.

The 10/100/1000BaseT ports use standard RJ-45 connectors and support MDI and MDI-X connectors. 
Ethernet ports normally use MDI connectors, and Ethernet ports on a hub normally use an MDI-X connector.

Use an Ethernet straight-through cable to connect an MDI to an MDI-X port. Use a cross-over cable to 
connect an MDI to an MDI port, or an MDI-X to an MDI-X port. 

 shows the 10BaseT, 100BaseTX, and 1000BASE-T connector (RJ-45).

 

60915

1

2

3

4

5

6

7

8

TP0+

TP0-

TP1+

TP2+

TP2-

TP1-

TP3+

TP3-