Cisco Cisco Email Security Appliance X1070 Mode D'Emploi

This system (hostname: $hostname) has entered a ‘resource 
conservation’ mode in order to prevent the rapid depletion of 
critical system resources. Queue utilization for this system 
has exceeded the resource conservation threshold of 
$queue_threshold_start%. The allowed receiving rate for this 
system will be gradually decreased as queue utilization 
approaches $queue_threshold_halt%. 

‘hostname’ - The name of 
the host.

‘queue_threshold_start’ - 
The percent threshold where 
queue tarpitting starts.

‘queue_threshold_halt’ - 
The percent threshold where 
the system will halt due to 
the queue being too full.

Critical. Sent when queue utilization has exceeded the system 
resource conservation threshold.

This system (hostname: $hostname) has entered a ‘resource 
conservation’ mode in order to prevent the rapid depletion of 
critical system resources. Listeners have been suspended 
because the current work queue size has exceeded the 
threshold of $suspend_threshold. Listeners will be resumed 
once the work queue size has dropped to $resume_threshold. 
These thresholds may be altered via use of the ‘tarpit’ 
command on the system CLI.

‘hostname’ - The name of 
the host.

‘suspend_threshold’ - 
Work queue size above 
which listeners are 
suspended.

‘resume_threshold’ - Work 
queue size below which 
listeners are resumed.

Information. Sent when listeners are suspended because the 
work queue size is too big.

This system (hostname: $hostname) has entered a ‘resource 
conservation’ mode in order to prevent the rapid depletion of 
critical system resources. 

‘hostname’ - The name of 
the host.

Critical. Sent when the appliance enters “resource 
conservation” mode.

This system (hostname: $hostname) has exited ‘resource 
conservation’ mode as resource utilization has dropped below 
the conservation threshold.

‘hostname’ - The name of 
the host.

Information. Sent when the appliance leaves ‘resource 
conservation’ mode.

See 

. —

See 

work queue paused, $num msgs, $reason

‘num’ - The number of 
messages in the work queue.

‘reason’ - The reason the 
work queue is paused.

Critical. Sent when the work queue is paused.

work queue resumed, $num msgs

‘num’ - The number of 
messages in the work queue.

Critical. Sent when the work queue is resumed.

Not running as root, unable to adjust system time

Warning. Sent when the appliance is unable to adjust time 
because NTP is not running as root.