Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch Manuel De Maintenance
Security
802.1X
Cisco Small Business SF200E Series Advanced Smart Switch
173
10
NOTE
See
for instructions on selecting the role for
configuring authentication on individual ports.
Modifying Port PAE Capabilities
Use the Port PAE Capabilities page to view and configure each port’s 802.1X role
as authenticator or supplicant.
as authenticator or supplicant.
To modify the role of a port as an authenticator or supplicant:
STEP 1
Click Security > 802.1X > Port PAE Capabilities in the navigation window.
STEP 2
Select the port to configure and click Edit.
STEP 3
Select the role for the port:
•
Authenticator—Select this option if the port must authenticate the remote
supplicant before granting access to a local port.
supplicant before granting access to a local port.
•
Supplicant—Select this option if the port must be connected to an
authenticator and ask permission from the remote authenticator before
accessing a remote port. When a port is acting as a Supplicant, the user
name and password defined in the User Accounts list of the switch must be
entered in the Radius Server for the authentication to succeed.
authenticator and ask permission from the remote authenticator before
accessing a remote port. When a port is acting as a Supplicant, the user
name and password defined in the User Accounts list of the switch must be
entered in the Radius Server for the authentication to succeed.
STEP 4
Click Apply and then click Close. Your changes are saved to the Running
Configuration.
Configuration.
Configuring Port Authentication
Use the Port Authentication page to configure port access control on ports that
serve as authenticators. By default, all ports are set to Authenticator. To enable a
port as an authenticator, see
serve as authenticators. By default, all ports are set to Authenticator. To enable a
port as an authenticator, see
To edit a port authenticator settings:
STEP 1
Click Security > 802.1X > Port Authentication in the navigation window.
The Port Authentication Table displays the current configuration of each port.
STEP 2
Select the port to configure and click Edit.