Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch Manuel De Maintenance

1

Cisco Small Business SF200E Series Advanced Smart Switch

9

 

This chapter provides an introduction to the web-based switch configuration 
utility and includes the following topics:

•

•

•

 

This section describes how to navigate the web-based switch configuration utility.

Browsers have the following restrictions:

•

If you are using Internet Explorer 8, open a browser window and configure 
the following settings:

Click Tools > Internet Options and then select the Security tab. Select 
Local Intranet and click Sites. Click Advanced and then click Add. Add the 
intranet address of the switch (http://<ip-address>) to the local intranet 
zone. The IP address can also be specified as the subnet IP address, so that 
all addresses in the subnet are added to the local intranet zone.

•

If you are using Internet Explorer 6, you cannot directly use an IPv6 address 
to access the switch. You can, however, use the Domain Name System 
(DNS) server to create a domain name that contains the IPv6 address, and 
then use that domain name in the address bar in place of the IPv6 address.

•

If you have multiple IPv6 interfaces on your management station, use the 
IPv6 global address instead of IPv6 link local address to access the switch 
from your browser.

•

Screen resolutions at 800x600 or lower in Internet Explorer browsers and 
Firefox 3.6 are not supported by the web-based switch configuration utility.