Cisco Cisco Tunnel Terminating Gateway (TTG) Guide De Dépannage
ACS Rulebase Configuration Mode Commands
▀ tcp proxy-mode
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
tcp proxy-mode
This command enables/disables TCP Proxy mode for all subscribers using this ACS rulebase.
Important:
This is a restricted command. Dynamic TCP Proxy mode is not supported in this release.
Product
ACS
Privilege
Security Administrator, Administrator
Syntax
Configures the default setting.
Default: Disabled
Default: Disabled
Disables TCP Proxy mode.
Optionally, TCP Proxy can be disabled for specific conditions that were previously enabled.
Optionally, TCP Proxy can be disabled for specific conditions that were previously enabled.
Important:
In this release, TCP Proxy functions only in Static mode. Dynamic TCP Proxy mode is not
supported, hence the dynamic keyword and options must not be configured.
Enables TCP proxy for subscriber-initiated TCP flows under the specified condition(s).
Optionally, TCP Proxy can be enabled only for specific conditions.
Optionally, TCP Proxy can be enabled only for specific conditions.
Specifies that TCP connection be split if all/any supported ACS features are enabled, and TCP Proxy mode is
enabled.
enabled.
Specifies that TCP connection be split if Content Filtering/ICAP is enabled.