Cisco Cisco Tunnel Terminating Gateway (TTG) Guide De Dépannage
ACS Rulebase Configuration Mode Commands
tcp proxy-mode ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
Specifies that TCP connection be split if DCCA is enabled.
Specifies that TCP connection be split if IP Readdressing feature is enabled.
Specifies that TCP connection be split if Nexthop Readdressing feature is enabled.
Specifies that TCP connection be split if x-Header Insertion feature is enabled.
Enables TCP proxy for every subscriber-initiated TCP flow.
Usage
Use this command to enable/disable TCP Proxy mode for all subscribers using this ACS rulebase. Optionally,
TCP Proxy can be enabled/disabled for specific ACS features. Note that enabling/disabling the TCP Proxy
feature for any of the optional ACS features, does not affect that feature.
Note that the last command overwrites any previous configuration. For example, when the following
commands are applied in sequence:
TCP Proxy can be enabled/disabled for specific ACS features. Note that enabling/disabling the TCP Proxy
feature for any of the optional ACS features, does not affect that feature.
Note that the last command overwrites any previous configuration. For example, when the following
commands are applied in sequence:
The nexthop configuration is overwritten by the x-header configuration.
Example
The following command enables TCP proxy for subscriber-initiated TCP flows whenever next-hop-forwarding-address
is configured in the charging action:
The following command enables TCP proxy for subscriber-initiated TCP flows whenever next-hop-forwarding-address
is configured in the charging action: