Cisco Cisco Aironet 1400 Wireless Bridge Guide De Montage

 lists the available Cisco RG-6 dual-coax cables.

 lists some available non-Cisco RG-6 coax cables.

The part numbers in 

 might change without notice. If this occurs, you should search the vendor 

website for the cable type.

Identify requirements for special hardware or fasteners that are not supplied in the installation kit. For 
example, it might be necessary to secure the bridge to an unusually large diameter pipe or odd-shaped 
structural member that the supplied mounting bracket cannot accommodate. The rooftop support 
requires the following user-provided fasteners:

Wooden structure — Four 1/4 x 2 inch (minimum) lag bolts

Concrete structure — Four 1/4 x 1 inch (minimum) bolts with concrete anchors

A pole or tower mount requires guillotine-style U bolts that fits the pole or mast in use. One source is:

McMAC.CAR. For more information, see this company’s website.

Document all the necessary tools, parts, brackets, hardware and accessories that are required for the 
installation and make sure you have them all before starting.

The Cisco Aironet 1400 Series Wireless Bridge is shipped with mounting hardware that accommodates 
tower, mast, or rooftop installations. The mounting hardware comprises the following key parts:

Rooftop mount (optional)

Housing brackets

Mounting bracket

20 ft (6.1 m)

AIR-CAB020DRG6-F

50 ft (15.2 m)

AIR-CAB05DRG6-F

100 ft (30.5 m) 

AIR-CAB100DRG6-F

RG6

9077

2360-T660-VB or 2560-T690-VB 9539