Cisco Cisco ASR 5000
Context Configuration Mode Commands E-H
▀ gtpp attribute
▄ Command Line Interface Reference, StarOS Release 18
2462
plmn-id [ unknown-use ]
Default: Enabled
For SGSN, reports the SGSN PLMN Identifier value (the RAI) in the S-CDR provided if the dictionary
supports it.
For GGSN, reports the SGSN PLMN Identifier value (the RAI) in the G-CDR if it was originally provided by
the SGSN in the GTP create PDP context request. It is omitted if the SGSN does not supply one.
Normally when SGSN PLMN-id information is not available, the attribute sgsnPLMNIdentifier is not
included in the CDR. This keyword enables the inclusion of the sgsnPLMNIdentifier with a specific value
when the SGSN PLMN-id is not available.
For SGSN, reports the SGSN PLMN Identifier value (the RAI) in the S-CDR provided if the dictionary
supports it.
For GGSN, reports the SGSN PLMN Identifier value (the RAI) in the G-CDR if it was originally provided by
the SGSN in the GTP create PDP context request. It is omitted if the SGSN does not supply one.
Normally when SGSN PLMN-id information is not available, the attribute sgsnPLMNIdentifier is not
included in the CDR. This keyword enables the inclusion of the sgsnPLMNIdentifier with a specific value
when the SGSN PLMN-id is not available.
unknown-use
hex_num
: is aa hexadecimal number from 0x0 through 0xFFFFFF that identifies a foreign
SGSN that has not provided a PLMN-id. For GGSN only.
qos max-length
Default: Disabled
Specifying this option will change the parameters related to QoS sent in S-CDR and SaMOG CDR. The
Specifying this option will change the parameters related to QoS sent in S-CDR and SaMOG CDR. The
max-
length
option is used to modify the length of QoS sent in CDR. The
qos_value
must be an integer from 4
through 24.
This feature is introduced to support Rel.7+ QoS formats.
This feature is introduced to support Rel.7+ QoS formats.
rat
Default: Enabled
For SGSN: includes the RAT (identifies the radio access technology type) value in the S-CDR.
For GGSN: includes the RAT (identifies the radio access technology type) value in the G-CDR.
For SGSN: includes the RAT (identifies the radio access technology type) value in the S-CDR.
For GGSN: includes the RAT (identifies the radio access technology type) value in the G-CDR.
recordextension
Default: Disabled
This keyword controls the inclusion of the optional field “RecordExtension” in the x-CDRs.
This keyword controls the inclusion of the optional field “RecordExtension” in the x-CDRs.
record-extensions rat
Default: Disabled
Enables network operators and/or manufacturers to add their own recommended extensions to the CDRs
according to the standard record definitions from 3GPP TS 32.298 Release 7 or higher.
Enables network operators and/or manufacturers to add their own recommended extensions to the CDRs
according to the standard record definitions from 3GPP TS 32.298 Release 7 or higher.
record-type { sgsnpdprecord | sgwrecord }
Important:
This keyword is available only when the SaMOG Mixed Mode license (supporting both 3G and 4G)
is configured.
Default: sgwrecord
Specifies the SaMOG CDR type to use.
For an SaMOG 3G license, this keyword will not be available. However, sgsnpdprecord type will be used as
the default record type.
Specifies the SaMOG CDR type to use.
For an SaMOG 3G license, this keyword will not be available. However, sgsnpdprecord type will be used as
the default record type.
served-mnai
Default: Disabled
This keyword controls the inclusion of the optional field “Served MNAI” in the x-CDRs.
This keyword controls the inclusion of the optional field “Served MNAI” in the x-CDRs.