Cisco Cisco ASR 5000
SGSN Service Configuration Mode Commands
gmm ▀
Command Line Interface Reference, StarOS Release 18 ▄
8647
exT3312_minutes
: Enter an integer from 0 to 18600 to identify the number of minutes for the
timeout; default is 186 minutes.
when-subcribed
: This keyword instructs the SGSN to only send the extended T3312 period RAU
timer value in Attach or RAU Accept messages if the SGSN receives the timeout value in an ISD
when the MS has indicated support in MS Network Feature Support.
when the MS has indicated support in MS Network Feature Support.
low-priority-ind-ue
: This keyword instructs the SGSN to include the extended T3312 timer value
only if the Attach/RAU Request messages include a LAPI (low access priority indicator) in the “MS
Device Properties”.
Device Properties”.
no
: This command filter instructs the SGSN to remove the extended T3312 configuration from the
SGSN Service configuration.
T3302-timeout t3302_dur
Default: 10
Specifies the retransmission timer value to guard the GPRS attach or RAU procedure on MS side.
Specifies the retransmission timer value to guard the GPRS attach or RAU procedure on MS side.
t3302_dur
is the waiting duration in minutes before retransmitting the specific message and must be an
integer from 1 through 186.
T3312-timeout t3312_dur
Default: 54
Specifies the retransmission timer value to guard the RAU procedure initiation on network side.
Specifies the retransmission timer value to guard the RAU procedure initiation on network side.
t3312_dur
is the waiting duration in minutes before retransmitting the specific message and must be an
integer from 1 through 186.
T3313-timeout initial t3313_init [ decrease t3313_decrement | increase
t3313_increment
]
Default: 5
Specifies the retransmission timer value to guard the for paging request procedure initiation on network side.
Specifies the retransmission timer value to guard the for paging request procedure initiation on network side.
initial
t3313_init
- Specifies the initial wating duration in seconds before retransmitting the specific
message.
t3313_init
must be an integer from 1 through 60.
decrease
t3313_decrement
- Specifies the decrement of the initial timer value in seconds.
t3313_decrement
must be an integer from 1 through 5.
increase
t3313_increment
- Specifies the increment of the initial timer value in seconds.
t3313_decrement
must be an integer from 1 through 5.
T3322-timeout t3322_dur
Default: 6
Specifies the retransmission timer value to guard the GPRS detach request procedure on network side.
Specifies the retransmission timer value to guard the GPRS detach request procedure on network side.
t3322_dur
is the waiting duration in seconds before retransmitting the specific message and must be an
integer from 1 through 20.
T3323-timeout T3323_dur
Default: 54
Specifies that the S4-SGSN Idle Mode Signaling Reduction T3323-timeout deactivation timer will be sent to
the UE in Attach Accept and Routing Area Update Accept Messages.
Specifies that the S4-SGSN Idle Mode Signaling Reduction T3323-timeout deactivation timer will be sent to
the UE in Attach Accept and Routing Area Update Accept Messages.
T3323_dur
specifies the amount of time, in minutes, that will transpire before the UE deactivates the ISR
feature if the UE is no longer in the UMTS coverage area and has not completed a Routing Area Update with
the S4-SGSN within the specified time duration. Once the timer expires, the S4-SGSN waits an additional
four minutes before beginning an Implicit Detach for the UE and sends a Detach Notification message (cause
the S4-SGSN within the specified time duration. Once the timer expires, the S4-SGSN waits an additional
four minutes before beginning an Implicit Detach for the UE and sends a Detach Notification message (cause