Cisco Cisco ASR 5700
Call Control Profile Configuration Mode
▀ qos
▄ Command Line Interface Reference, StarOS Release 17
2048
pre-emption
Defines the pre-emption/vulnerability criteria for PDP Contexts imported from SGSN on Gn/Gp:
capability
may-trigger-pre-emption
: PDP Contexts imported from Gn/Gp SGSN may preempt
existing bearers.
shall-not-trigger-pre-emption
: PDP Contexts imported from Gn/Gp SGSN shall not
preempt existing bearers.
vulnerability
not-pre-emptable
: PDP Contexts imported from Gn/Gp SGSN are not vulnerable to pre-
emption.
pre-emptable
: PDP Contexts imported from Gn/Gp SGSN are vulnerable to pre-emption.
ue-ambr
This keyword enables the operator to configure either the aggregate maximum bit rate stored on the UE (UE
AMBR) or select the preferred uplink and downlink QoS cap values.
AMBR) or select the preferred uplink and downlink QoS cap values.
Important:
The SGSN only supports the
ue-ambr
keyword beginning in Release 16.
Configures the aggregate maximum bit rate that will be stored on the UE (user equipment).
max-ul mbr-up
: Defines the maximum bit rate for uplink traffic.
mbr-up
: Enter a value from 1 to 1410065408 (Release 16.1 and higher), or 0 to 1410065408.
max-dl mbr-down
: Defines the maximum bit rate for downlink traffic.
mbr-down
: Enter a value from 1 to 1410065408 (Release 16.1 and higher), or 0 to 1410065408.
prefer-as-cap both-hss-and-local { local-when-subscription-not-available |
minimum | subscription-exceed-reject [ emm-cause-code [ eps-service-disallowed |
eps-service-not-allowed-in-this-plmn | no-suitable-cell-in-tracking-area | plmn-
not-allowed | roaming-not-allowed-in-this-tracking-area | tracking-area-not-
allowed ] ] }
minimum | subscription-exceed-reject [ emm-cause-code [ eps-service-disallowed |
eps-service-not-allowed-in-this-plmn | no-suitable-cell-in-tracking-area | plmn-
not-allowed | roaming-not-allowed-in-this-tracking-area | tracking-area-not-
allowed ] ] }
This set of options is only available on the MME.
Specifies the QoS cap value to use.
Specifies the QoS cap value to use.
local-when-subscription-not-available
: Use the locally configured values if the Home
Subscriber Server (HSS) does not provide QoS bit rate values.
minimum
: Use the lower of either the locally configured QoS bit rate or the HSS-provided QoS bit rate.
This will override the HSS provided values if it is greater than the locally configured values, or if the
HSS does not provide any values.
HSS does not provide any values.
subscription-exceed-reject
: If the requested QoS bit rate exceeds the locally configured value,
reject the PDN connection.
emm-cause-code
: Specifies the EPS Mobility Management (EMM) cause code to return when the
PDN connection is rejected.
eps-service-disallowed
- Default
eps-service-not-allowed-in-this-plmn