Cisco Cisco WAP571E Wireless-AC N Premium Dual Radio Outdoor Access Point Manuel De Maintenance

Users

Cisco WAP571/E Administration Guide

152

Select SNMP > Users in the navigation pane.

Click Add to create a new row in the SNMPv3 Users table.

Check the box in the new row and click Edit.

Configure the parameters:

•

User Name—A name that identifies the SNMPv3 user. User names can 
contain up to 32 alphanumeric characters.

•

Group—The group that the user is mapped to. The default groups are RW 
and RO. You can define additional groups on the SNMP Groups page.

•

Authentication Type—The type of authentication to use on SNMPv3 
requests from the user, which can be one of these options:

-

MD5—Require MD5 authentication on SNMP requests from the user.

-

None—SNMPv3 requests from this user require no authentication.

•

Authentication Pass Phrase—(If you specify MD5 as the Authentication 
Type) A pass phrase to enable the SNMP agent to authenticate requests 
sent by the user. The pass phrase must be between 8 and 32 characters in 
length.

•

Encryption Type—The type of privacy to use on SNMP requests from the 
user, which can be one of these options:

-

DES—Use DES encryption on SNMPv3 requests from the user.

-

None—SNMPv3 requests from this user require no privacy.

•

Encryption Pass Phrase—(If you specify DES as the privacy type) A pass 
phrase to use to encrypt the SNMP requests. The pass phrase must be 
between 8 and 32 characters in length.

Click Save. The user is added to the SNMPv3 Users list and your changes are 
saved to the Startup Configuration.

To remove a user, select the user in the list and click Delete.