Cisco Cisco WAP571E Wireless-AC N Premium Dual Radio Outdoor Access Point Manuale Di Manutenzione
SNMP
Users
Cisco WAP571/E Administration Guide
152
10
STEP 1
Select SNMP > Users in the navigation pane.
STEP 2
Click Add to create a new row in the SNMPv3 Users table.
STEP 3
Check the box in the new row and click Edit.
STEP 4
Configure the parameters:
•
User Name—A name that identifies the SNMPv3 user. User names can
contain up to 32 alphanumeric characters.
contain up to 32 alphanumeric characters.
•
Group—The group that the user is mapped to. The default groups are RW
and RO. You can define additional groups on the SNMP Groups page.
and RO. You can define additional groups on the SNMP Groups page.
•
Authentication Type—The type of authentication to use on SNMPv3
requests from the user, which can be one of these options:
requests from the user, which can be one of these options:
-
MD5—Require MD5 authentication on SNMP requests from the user.
-
None—SNMPv3 requests from this user require no authentication.
•
Authentication Pass Phrase—(If you specify MD5 as the Authentication
Type) A pass phrase to enable the SNMP agent to authenticate requests
sent by the user. The pass phrase must be between 8 and 32 characters in
length.
Type) A pass phrase to enable the SNMP agent to authenticate requests
sent by the user. The pass phrase must be between 8 and 32 characters in
length.
•
Encryption Type—The type of privacy to use on SNMP requests from the
user, which can be one of these options:
user, which can be one of these options:
-
DES—Use DES encryption on SNMPv3 requests from the user.
-
None—SNMPv3 requests from this user require no privacy.
•
Encryption Pass Phrase—(If you specify DES as the privacy type) A pass
phrase to use to encrypt the SNMP requests. The pass phrase must be
between 8 and 32 characters in length.
phrase to use to encrypt the SNMP requests. The pass phrase must be
between 8 and 32 characters in length.
STEP 5
Click Save. The user is added to the SNMPv3 Users list and your changes are
saved to the Startup Configuration.
saved to the Startup Configuration.
NOTE
To remove a user, select the user in the list and click Delete.