Cisco Cisco Prime Access Registrar 6.0

 lists the anomalies fixed in Cisco Prime AR 6.0.

Cisco Prime AR crashes while sending traffic in eap-tls and eap-ttls.

Cisco Prime AR crashes or restarts while reloading with TACACS + traffic without core file.

TotalPacketsInuse in Tacacs statistics are not displayed properly in Cisco Prime AR 6.0 CLI and GUI.

Failover takes long time when you configure odbc-accounting with group service.

Cisco Prime AR crashes during TACAS+ traffic with repeated users and when the authentication type is 
ASCII and PAP.

Cisco Prime AR crashes when you change the protocol/type from odbc/odbc-acc to oci/oci-acc.

In Cisco Prime AR 6.0 GUI, if you save the client configuration details without entering values for the 
mandatory fields, the Save and Cancel buttons disappear.

In Cisco Prime AR 6.0 GUI, list is not populated during switching between Radius and Vendor attributes.

In Cisco Prime AR 6.0 GUI, session key is not displayed in query-sessions.

After installation, Cisco Prime AR restarts with core file.

In Cisco Prime AR 6.0, the value for totalPacketsInUse should not be negative in TACACS+ statistics output.

Cisco Prime AR crashes when you receive Disconnect-NAK packet from NAS.

When UseECCCertificates is enabled, Cisco Prime AR crashes with peapv0/peapv1 in the presence of traffic 
with mschap as inner method.

Unable to reset the EnableKeepAlive field while configuring LDAP in Cisco Prime AR 6.0 GUI.

Multiple traps are displayed for the LDAP server when the server is up/down or a bad route is added/removed.

Multiple traps are displayed for the proxy server when you shut down or start up the AR server.