Cisco Cisco Prime Access Registrar Jumpstart 6.1 Guide De Montage

This guide contains the following sections:

You must have answers to some questions in order to initially configure the Prime Access Registrar Jumpstart. The questions 
below beginning with Select require you to come up with a new value which is unique to this appliance, while the questions 
beginning with Determine require you to find out information that is not unique to this appliance.

You should have answers for the following questions when configuring the Prime Access Registrar Jumpstart:

Select the IP address for the CIMC port on the Prime Access Registrar Jumpstart.

Determine the netmask (subnetmask) for the CIMC port.

Determine the gateway for the CIMC port.

You should have answers to the following questions when you are configuring network information for ESXi:

Select the IP address for the ESXi installation on the Prime Access Registrar Jumpstart.

Determine the netmask for the IP address for the ESXi installation.

Determine the gateway address for the ESXi installation on the Prime Access Registrar Jumpstart.

Determine the VLAN (if any) for the ESXi installation on the Prime Access Registrar Jumpstart.

You should have answers for the following questions related to configuring the Prime Access Registrar virtual appliance:

Select a virtual machine name for the deployed virtual appliance.

Select a root password for the RHEL 6.2 operating system on the virtual appliance. You will be prompted to enter and 
configure the root password during your first boot.

Select an IP address for the Prime Access Registrar virtual appliance.

Select a DNS name (hostname) for the virtual appliance. It should be placed into DNS using the IP address you selected for 
the virtual appliance.

Select a username and password for the administrator of the Prime Access Registrar installation.

Determine the netmask associated with the IP address for the virtual appliance.

Determine the gateway address appropriate to the IP address and netmask.

Determine the IP addresses of up to two DNS servers for the virtual appliance to use.

Determine any proxy values necessary for the virtual appliance to access the Internet.

Determine the server details for the Prime Access Registrar Jumpstart that you need to know based on the IP configuration 
of:

DNS server details in case of static IP configuration

DHCP server details in case of dynamic IP configuration.

Ensure that you have the Prime Access Registrar licenses from Cisco.com before you get started. To obtain the license, go 
to 

. Use the PAK that you obtained with Prime Access Registrar Jumpstart to obtain the 

corresponding software license.