Cisco Model GS7000 4-Port Node 1 GHz with 42 54 Split Guide De Montage
Chapter 5 Using the Web Interface
60
4037424 Rev A
Input Parameters
Description
Traceroute size
Range is 0 to 1518. 0 is the standard size, resulting in packets
of 40 bytes inclusive of all overhead.
of 40 bytes inclusive of all overhead.
Port
Port to use. Standard is 33434 as the initial port.
Controlling the Traceroute Test
The Traceroute Test is controlled by the following buttons.
Button
Description
Start Test
Starts the Traceroute test. Each of the values provided in the
input fields is evaluated for validity.
input fields is evaluated for validity.
If the host name field is blank, the test will not proceed.
(The exception is leaving it blank when a previous name
had been entered. In that case that name will be used.)
(The exception is leaving it blank when a previous name
had been entered. In that case that name will be used.)
Range checking on the parameters. Any parameter out
of range will be ignored, and the default value used.
of range will be ignored, and the default value used.
Any issues with the parameters will be displayed at the top
of the results box. When the test is started, the web page will
begin to automatically refresh. This message also appears,
indicating the parameters actually in use:
of the results box. When the test is started, the web page will
begin to automatically refresh. This message also appears,
indicating the parameters actually in use:
Traceroute in use from <source>; max TTL xxx; size yyy;
port nnnnn
port nnnnn
This message is also in the text box.
Abort Test
Stops any traceroute test currently in progress.
Clear Results
Clears the results window.
Test Results
Below the test control buttons is a text area that displays the results of the Traceroute
test. Any issues with the parameters will be displayed at the top of the results box.
During a test, the web page will automatically refresh to show the current results.
This refresh stops once the test is completed.
test. Any issues with the parameters will be displayed at the top of the results box.
During a test, the web page will automatically refresh to show the current results.
This refresh stops once the test is completed.
The results area permits the user to select results and copy them for pasting into
another program. You access this feature using one of the standard web browser
methods:
another program. You access this feature using one of the standard web browser
methods:
Left-click the box and press Ctrl-A (select all)
Right-clicking in the box and click Select all