Cisco Headend System Release 2.7 Guide De Montage
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Chapter 13 Configuring the System for Satellite and Terrestrial Support
162
4017650 Rev C
Model a Satellite Transport
To model a satellite transport, you must provision a cable Simulcrypt Synchronizer
(SCS) if one is not already available. Complete the following steps to model a
satellite transport.
1 On the DNCS Administrative Console, click the DNCS tab.
2 Click the Network Element Provisioning tab.
3 Click SCS. The SCS Devices window opens.
(SCS) if one is not already available. Complete the following steps to model a
satellite transport.
1 On the DNCS Administrative Console, click the DNCS tab.
2 Click the Network Element Provisioning tab.
3 Click SCS. The SCS Devices window opens.
4 Click New. The New SCS Device window opens.
5 In the Name field, enter the name for the SCS.
6 In the IP Address field, enter the IP address for the SCS device.
6 In the IP Address field, enter the IP address for the SCS device.