Cisco Headend System Release 2.7 Guide De Montage
Chapter 3 SR i4.2.2 Common Upgrade Procedures
56
4036631 Rev B
Boot the DNCS
In this procedure, you will restore power to the DNCS, boot the DNCS, and log in as
dncs user.
1 Turn on power to the DNCS.
2 When the message Boot device: <full path of boot device> disk file and args
dncs user.
1 Turn on power to the DNCS.
2 When the message Boot device: <full path of boot device> disk file and args
appears on the screen of the DNCS, press the Stop and a keys simultaneously.
An ok prompt appears.
An ok prompt appears.
3 Type boot -r and then press Enter.
Results:
A series of messages scroll across the screen as the DNCS boots.
The CDE window opens.
4 Log into the CDE of the DNCS as dncs user.
5 Ensure that the DNCS application is still stopped.
5 Ensure that the DNCS application is still stopped.
Notes:
In rare cases, the DNCS application may have restarted.
If the DNCS application restarted, follow the Stopping the DNCS (on page
112) procedure.
112) procedure.