Cisco Model 6109 6 MHz Off-Air Reference (NTSC) Guide De Montage
Chapter 3 USRM Web Interface
254
4039132 Rev B
VodSm - Configuration Page
This page allows the operator to configure operational parameters for VodSm.
Parameters
The following table explains the VodSm - Configuration page parameters.
Parameter
Description
AdminState
The AdminState provides operator control over the
application. The allowed states are InService,
OutOfService and Release.
application. The allowed states are InService,
OutOfService and Release.
Inservice indicates the software is ready to provide
service.
service.
OutOfService indicates that the software will not
process requests for service. Requests from client
devices will be accepted and discarded without a
reply to the client device.
process requests for service. Requests from client
devices will be accepted and discarded without a
reply to the client device.
Release causes the application to release all sessions
and associated resources.
and associated resources.
ClientSip Timeout
The ClientSipTimeout indicates the timeout period for
client session-in-progress messages. If the application
software does not receive a session-in-progress message
from the client device within the timeout value, the
session and associated resources are released.
client session-in-progress messages. If the application
software does not receive a session-in-progress message
from the client device within the timeout value, the
session and associated resources are released.
The default value is 10 minutes.
Configuring the value to 0 causes the application
software to not require client session-in-progress
messages to maintain the session.
software to not require client session-in-progress
messages to maintain the session.