Cisco Model 6109 6 MHz Off-Air Reference (NTSC) Guide De Montage
Start the Server in Supervised Mode
78-4021139-01 Rev D
453
c Verify that the system settings are correct from the list and screen below:
–
NormalMode = Primary
–
StartupMode = Supervised
–
CurrentMode = Online
–
ProvisionState = Transition
If any of the four system settings differs from the above, contact technical
support.
5 Reset the Server Name as follows:
a Click Configuration.
b Enter the site name in to the Site Name field.
c Click Commit Changes.
d Click the Reload Current Page icon or press the F5 key to load the site name
b Enter the site name in to the Site Name field.
c Click Commit Changes.
d Click the Reload Current Page icon or press the F5 key to load the site name
information and refresh the navigation tree.
6 Reset the AutoConfigFile Name(s) as follows:
a Select Platform > ConfigManager > Configuration.
b Change the display mode from Normal to Config, and then click Commit
b Change the display mode from Normal to Config, and then click Commit
Changes.
c Select Platform > ConfigManager >Configuration Files.
d Add the configuration file(s) to the AutoConfigFileName field, and then click
d Add the configuration file(s) to the AutoConfigFileName field, and then click
Commit Changes.
e Select Platform > ConfigManager > Configuration.
f Change display mode back to Normal, and then click Commit Changes.
f Change display mode back to Normal, and then click Commit Changes.